Button reference:
Menu: Center button in directional pad. (White Dot)
Select: Center button in directional pad. (White Dot)
Back: Left arrow button
Provisioning steps:
- Factory reset the phone if there was any previous configuration. You may skip this if the phone is already stock from the factory.
- Press the Menu Button
- Scroll down to "System" and press select.
- Scroll down to "Factory Reset", and press select.
- Confirm the Factory reset on both prompts
- Phone will reboot automatically, and be cleared of any settings.
- Configure the Update server to connect to FluentStream
- Press the Menu Button
- Scroll down to "System" and press select.
- Scroll down to "Upgrade" and press select.
- Scroll down to Upgrade Via and press select
- Highlight "HTTP" and press select.
- After pressing select, you will be brought back to the Update menu
- Scroll up to Config server and press select
- Use the Backspace soft key to clear any existing values.
- Use the number pad to enter "p.fluentcloud.com" -- This is not case sensitive, so don't worry about that. The * key is used to enter "."
- Press the Ok softkey when done. You will be prompted to reboot the device - confirm by pressing the Reboot softkey.
- Configuration is complete! The phone will reboot 1-3 times automatically depending on the current firmware it has.