Button reference:


Menu: Center button in directional pad. (White Dot)

Select: Center button in directional pad. (White Dot)

Back: Left arrow button


Provisioning steps:

  1. Factory reset the phone if there was any previous configuration.  You may skip this if the phone is already stock from the factory.
    1. Press the Menu Button
    2. Scroll down to Config and press select.
    3. Scroll down to Factory Reset, and press select.
    4. Confirm the Factory reset on both prompts
    5. Phone will reboot automatically, and be cleared of any settings.
  2. Configure the Update server to connect to FluentStream
    1. Press the Menu Button
    2. Scroll down to Config and press select.
    3. Scroll down to Upgrade and press select.
    4. Scroll down to Upgrade Via and press select
      1. Highlight "HTTP" and press select.
      2. After pressing select, you will be brought back to the Update menu
    5. Scroll up to Config server and press select
      1. Use the Backspace soft key to clear any existing values.
      2. Use the number pad to enter "p.fluentcloud.com" -- This is not case sensitive, so don't worry about that.  The * key is used to enter "."
      3. Press the Ok softkey when done.  You will be prompted to reboot the device - confirm by pressing the Reboot softkey.
  3. Configuration is complete!  The phone will reboot 1-3 times automatically depending on the current firmware it has.