To place a call using the headset:

Do one of the following:
  • With the optional headset connected, press or the NewCall soft key to obtain dial tone.
    Press .
    Dial the desired number using the dial pad.
  • With the optional headset connected, dial the desired number using the dial pad.
    Press .


To end a call using the headset:

Press .


Enabling the Headset Memory Mode

This feature is especially useful for permanent or full-time headset users.


To permanently enable the Headset Memory Mode:

1. Press .
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Use  or  to select Enabled, and then press the Select soft key.

4. Press  to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.

To activate Headset Memory Mode:

Press  twice.

The flashing headset icon on the graphic display or a flashing headset key indicates that the headset mode is activated. Pressing  or the Answer soft key to receive a call will now connect to your headset automatically.

Selecting the Correct Headset for Electronic Hookswitch

This feature allows you to answer your phone when you are using a headset.


To select a headset that supports electronic hookswitch:

1. Press  .
2. Select Settings > Basic > Preferences > Headset > Analog Headset Mode.
3. Use  or  to select your headset, and then press the Select soft key.

4. Press  to return to the idle display.